Tag Archive


302 1927 Rally 1969 automobile Automotive battery bolt California Mille camshaft classic car crankshaft cylinder disassembly emergency engine Fastback Father and Son Ford Garage historic car rally historic rally How to London Mille Miglia muscle car Mustang oil paint panel parts project pump rear rebuild removal Restoration steering Three Lions Garage tips TLG tools torque transmission weld workshop

UP IN THE AIR

With the suspension completely removed, I had only to pull out some key steering components before we could mount the Rotisserie. These included the Pitman arm, the steering arm, the power-steering hydraulic pump, and the idler arm. This last piece must be replaced if there is any play where it mounts to the body; otherwise, […]

Goodbye, rear suspension (and good riddance!)

I returned to TLG last weekend to finish the job I had started: rear-end removal.Once the drum brakes were pulled (a process I detailed in my last post), the only parts between me and the differential were the leaf springs. Before these are removed, jack up the rear axle so that it is barely supported; […]

Brake Cylinder

This past weekend, Dad, Charlie and I managed to put in a good number of hours at TLG (I know, its Friday already, but school and cross-country get in the way of writing these things). I wasn’t too productive; the only things left to remove from the car before I start suspension work will require […]

Our other vehicles need love too

True Confession time: It’s not all vintage vehicle fun at the Three Lions Garage.  Our newer vehicles need care too.  While I’ll admit that I’ll rarely decide to sacrifice any of the few precious hours I can manage to dedicate to the garage each week on projects as routine as oil changes or tune ups […]

I pulled it’s wiring harness with some fava beans and a nice chianti…

Back from camp, back to school, and back to work! Right before I left for Kona I managed to pull the entire rear wiring harness (the only thing holding in the front wiring is the firewall). Packing, however, managed to rob me of a chance to blog about it. The fact that I didn’t take […]

VOILA!

Fini! Terminado! Finito! DONE! (Drums, please!) The motor is finished! Didn’t think I’d be saying this a whole year into the project.  I mean, how long can engine reassembly take? Ah well, I’ll just have to pick up the pace. My goal is to finish the whole project by the time school starts next year […]

Our 302: all dressed up and nowhere to go

Alright! Reporting from Snowbird, Utah right now, tired from a long day skiing. My English teacher once told me that writing is like a miniskirt: it should be long enough to cover the subject, but short enough to keep it interesting. I plan to make this entry short and concise. Now that the valve train […]

The Mustang MacGyver

Yesterday, I squeezed in some time at the garage to prepare for piston installation. Well, our plan was to get to pistons, but we ran into a couple problems (don’t we always?). Ollie tagged along to work on his Oscar the Grouch costumein the last few days before Halloween. The new bolts for the thrust […]